MaxxECU Race Premium KitFull-featured MaxxECU with built-in wideband controller, Bluetooth, knock sensors, and EGT inputs. MaxxECU Race is a good option for 4-8 cylinder builds requiring knock detection and exhaust temperature monitoring.What’s Included:1x MaxxECU Race ECU 2x 3m pre-wired looms with extra cable 1x Push-lock vacuum hose and fittings 1x LSU 4.2 wideband sensor with connector 1x USB cable 1x Bluetooth antenna 1x Pinout sheetBuilt-in Features and Physical Specifications:Built-in wideband controller (LSU 4.2/4.9) 4 bar MAP sensor included DBW capable Bluetooth connectivity with MDash Android app support 8MB internal logging at 1000Hz All EGT inputs sample at 50Hz Dimensions: 155x195x40mm (including mounting tabs) Weight: 880g Case: AluminumOutputs:8x Injector outputs (peak/hold, 8A each) – runs high or low impedance injectors 8x Ignition outputs (5V signal for coils, CDI units, or ignition modules) 9x Low-side outputs for auxiliary functions (fuel pumps, idle valves, boost control, etc) 2x 12V high-side outputs 4x Half bridge outputs (1 or 2 drive-by-wire throttle, GM idle stepper)Inputs:4x Temperature sensors 7x Analog inputs (0-5V sensors) 2x Trigger inputs (VR or Hall) 4x Digital inputs (a 5th is shared with a GPO) 2x Knock sensors 8x EGT (thermocouple) 1x Internal wideband 1x CANbusSuitable For:4-8 cylinder engines, sequential or batch injection, Wasted spark or individual coil ignition, Drive-by-wire throttle control, Flex fuel, traction control, launch control, anti-lag.Software:Free MTune software (Windows only). Free MDash app available for Android devices via Google Play Store. Download software and base maps here.NZ Wiring Stock:We keep MaxxECU Race Premium kits in stock in Petone, Wellington. As the official NZ MaxxECU dealer, we provide full technical support and installation guidance.
