Long Threaded Hall Effect Speed SensorM12x1.0 threaded hall effect speed sensor with 65mm long body and red anodized aluminum housing. Uses Cherry sensor technology. For aftermarket trigger systems and gear tooth sensing applications.What’s Included:– 1x M12 Hall Effect Sensor – 2x M12x1.0 locking nutsWiring Information:– Brown: Supply voltage (5-24VDC) – Black: Signal output – Blue: Ground (0V)Technical Specifications:– Thread: M12x1.0 – Probe diameter: 12mm – Probe depth: 65.5mm – Housing: Red anodised aluminium – Sensor type: Hall effect (Cherry sensor) – Target material: Ferrous metal (steel) – Supply voltage: 5-24VDC – Max switching speed: 15KHz – Operating temperature: -40°C to 125°C – Protection rating: IP67 – Wire length: 1000mm – Recommended air gap: 0.2-2mmInstallation Notes:Signal output requires pullup resistor – see datasheet for specifications. Do not use on 5V supply if supply voltage may drop below 5V. Applications include aftermarket trigger systems, gear tooth sensing, speed sensing, and crankshaft position sensing.Wiring Information:– Brown: Supply voltage (5-24VDC) – Black: Signal output – Blue: Ground (0V)Mounting information:Probe Diameter: 12mm Probe Depth: 65.5mm Wire Length: 1000mm Recommended Gap: 0.2-2mmNZ Wiring Stock:We keep this hall effect sensor in stock in Petone, Wellington.
