Primarily designed to be connected directly to MaxxECU Race and Pro ECU’s, but obviously work with other systems as well.Description1.8 meter length4.7 mm diameterStainless 1/8NPT compression fittingMini K type connector-100 to 1300 degrees Celsius (-148 to 2375 F)Open tip sensor tip. Faster responding then closed tip Not Recommended for use on Rotary engines. For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn. For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not overtightened.This item is non stocked so may take 2 weeks to come from MaxxECU
